Nakamichi 700 ZXL

Nakamichi 700 - jeden z ładniejszych jakie widziałem

Nakamichi 600 - też ciekawy, do tego reszta klocków tez w takim designie

no to może coś naszego

Unitra ZRK M 601 SD MARCIN



na stronie także ktoś zamieścił w swojej kolekcji

o prosze jaki cukiereczek - kto ma niech sie przyzna ?
Nakamichi 1000 DAT (żeby nie było rok 1988-95r) miał jeszcze slicznego pilota

AKAI GXC-65d
1972r.



Form Stereo cassette deck
Truck system Four two truck stereo system
Tape speed 4.8cm/s
Wow and flutter Below 0.12%WRMS
Frequency response Chromium tape use: 30Hz - 18000Hz
Low noise tape use: 30Hz - 16000Hz
Distortion 2% or less (1kHz, 0VU)
Output (only GXC-65) Music power: 12W (6W/6W, 8ohms)
Continuous cruising power: 10W (5W/5W, 8ohms)
S/N 50dB or more
Dolbey on: 58dB
Elimination rate 70dB or more
Head GX magnetic recording reproducing head x1
Erasing head x1
Motor Hysteresis synchronous motor x1
Fast forward/rewinding time Less than (C-60 type cassette tape use) 65 seconds
Recording time 2-hour stereophonic recording (C-120 type cassette tape use)
Output jack Line: 0.775V(0VU)/(the optimal load impedance: more than 20kohm)
Headphone: 30mV/eight ohms
Speaker: 6W/8 ohm (only each 、GXC-65)
Input jack Microphone: 0.2mV/4.7kohm
Line: 50mV/200kohm
DIN jack 0.4V/5mV
The semiconductor used Transistor: 28 pieces (GXC-65:36 piece)
FET: Two pieces
Linear IC: Two pieces
Diode: 31 pieces (GXC-65:35 piece)
Power supply voltage AC100V-240V, 50Hz/60Hz
Power consumption GXC-65D:20W
GXC-65:50W
Dimensions Width 415x height 180x depth of 290mm
Weight GXC-65D:9.2kg
GXC-65:10.1kg
Attachment
GXC-65D: Cassette demonstration tape x1
Connection cord x2
Spare fuse x1 set
GXC-65: Microphone x2
Cassette demonstration tape x1
Spare fuse x1 set

dokładamy kolejne piękne magnetofony kasetowe

Technics RS-M95

więcej pięknych fotek tutaj

Tandberg TCD-3014

więcej info i zdjęcia [url]tutaj

Teac 8030S GOLD

wiecej fotek tutaj



Motors : 1x DD capstan
1x DC-Servo (reel)
1x DC-Servo (aux.)
1x DC (door)
Heads : 2x Cobalt Amorphous
1x Ferrite
Wow : 0,022% (WRMS)
-20dB response : 15Hz...21Khz (Type IV ; ±3dB)
15Hz...20Khz (Type II ; ±3dB)
15Hz...18Khz (Type I ; ±3dB)
S/N ratio : 60dB (3% THD, wtd)
70dB (3% THD, Dolby B, wtd)
80dB (3% THD, Dolby C, wtd)
84dB (3% THD, Dolby S, wtd)
Dimensions : 44,2 x 14,9 x 35,2cm
Weight : 9,5kg.

Luxman K-03

wiecej fotek tutaj



Tape speed : 4,75cm/s
Heads : 1x 3-layer laminated sendust for record
1x Hot Isostatic Press ferrite for playback
1x dual-gap sendust & ferrite for erase
Motors : 1x DD-FG Servo core/brush/slotless DC for capstan
1x DC for reel drive
1x DC for head-housing lifter
Wow & flutter : 0,025% (JIS WRMS)
Frequency response : 20Hz...23Khz (Type IV)
20Hz...21Khz (Type IV, ± 3dB)
20Hz...21Khz (Type II)
20Hz...20Khz (Type II, ± 3dB)
20Hz...21Khz (Type I)
20Hz...20Khz (Type I, ± 3dB)
S/N ratio : 73dB / 67dB / 60dB (Type IV, Dolby C / B / off ; IEC-A)
73dB / 66dB / 58dB (Type II, Dolby C / B / off ; IEC-A)
71dB / 64dB / 56dB (Type I, Dolby C / B / off ; IEC-A)
THD : 1,3% (1Khz, 160nwb/m)
Real Analyzed distortion : 0,6% (1Khz, 160nwb/m)
Inputs : 150mV (line in)
Outputs : 540mV (line out)
50mW / 8 Ohm (headphones)
FF/Rew speed : 85s (C-60)
FF/Rew high speed : 50s (C-60)
Dimensions : 45,3 x 16,3 x 36,5cm (K-03)
Weight : 11,1kg (K-03)
11,4kg (K-03W)
List price : 178,000¥ (october 1984)